18-EN
3 The delay units are ms (milliseconds), inch
(inches) and cm (centimeters).
Delay range: 0.000~20.000 milliseconds;
0~692 cm;
0~273 inches.
Mix
After the PXE-C80-88 machine sets the sound source
signal into the audio processor, it is divided into the
volume of each output channel, and the purpose of
mixing and mixing can be achieved by adjusting the
volume of each sound source in the channel.
Input mode selection
Input mode selection page
1 Select the desired channel type.
2 Click the [Enter] button to configure the
channel type. At this time, the input channel
type is fixed and cannot be configured.
3 Select Customized to clear all input channel
types. At this time, you can customize the
input channel types.
Output mode selection
Output mode selection page
Refer to “Input mode selection page” (page 18).
Anti EQ
AntiEQ page
Setting items:
Anti EQ
Setting content:
Fixed/EQ adjustment/Equalizer setting/Save/
Signal gain/Sensitivity
Hi.Level input channel type.
Fixed the RTA data.
EQ editing and display area.
Equalizer settings.
Save the AntiEQ data.
Signal gain.
Sensitivity.
RTA data.
To Next Page
Loading...
Need help?
General
