11
For a detailed description of the selected setting items, please refer to the applicable sections below.
1 Preset equalizer
A total of 10 typical equalizer settings will be preset in the factory for a variety of audio
source materials.
Standard (initial setting) ↔ Popular ↔ Rock ↔ News ↔ Jazz ↔ Electronic ↔ Hip-
↔ Light music ↔ Country ↔ Classic ↔ Custom
Caution: The "Custom" item will be displayed when an adjustme
nt is made to the
Bass/Treble or Parametric Equalizer settings, and the “Custom” item will be displayed.
2 Treble/Bass level
You can select Treble or Bass and adjust the level based on your own preference. The
adjustable range is: -7 ~ +7 (initial value: 0)
3 Bass setting
When the subwoofer is turned on, you can adjust the subwoofer's phase output level,
phase setting and bass level.
4 Balance setting
Channel balance, adjustable range: L15~0~R15 (initial value: 0)
Fader, adjustable range: F15~0~R15 (initial value: 0)
5 Parametric Equalizer
You can modify the equalizer settings to better fit the response curve to your preference,
including 10 sections of EQ adjustable frequency range, Q value and gain.
6 Input source volume
Select input source volume adjustment in the sound effect setting mode. The adjustable
range is: -60dB~0dB (initial value: 0dB)
7 Time correction
Select “Adjust time correction” in the sound effect setting mode, and turn the knob to
select the speaker or time correction unit for adjustment.
8
Frequency divider
setting
In the Setting interface, press and hold , , and
for more than 2 seconds each in
sequence, turn the knob to select "Divide-by-3" or "Divide-by-2" mode, and press
to
confirm the selection of divider system.
9 Sound storage setting
Dealer setting: can be called by short pressing the knob; in the setting interface, press and
hold , knob, and for more than 2 seconds each in sequence
to call the electrical test
mode so that the storage can be used;
Custom setting: short press the kno
b to use the custom setting; press and hold the knob
for more than 2 seconds to store the tuned sound parameters.
10
Sound effect clear
setting
When this setting is enabled, the settings on sound effects such as preset equalizer will
become invalid. Disab
le this setting and the previous sound effect settings will be
restored.
To Next Page
Loading...
