Alpine UTX-M06 - Tools that May be Required (Depending on the Vehicle); Accessory List

3
Tools that may be required (depending on the vehicle)
Panel removing tool
Socket
Electric drill
Torx screwdriver
Phillips screwdriver
Sleeve wrench
Wrench
Wire cutter
Wire crimper
Wire stripper
Spectrum analyzer
Oscilloscope
Accessory list
Power cord
High level input line
USB extension cable (1.5 m)
Controller extension cable (2.5 m)
Complex line
Mounting bracket × 2
Self-tapping screws (M4×20)
Machine tooth screws (M5×8)