13
For a detailed description of the selected setting items, please refer to the applicable sections below.
1
Auxiliary audio
source
Auxiliary audio source options: Bluetooth ↔ High level ↔ AUX ↔ Off
Primary source attenuation: it is used to set the amount of attenuation needed for the
primary source when mixed sources are input, and the adjustable range is 0~100%.
2
Built-in power
amplifier
When connected to an external amplifier, sound quality can be improved by stopping
the power supply to the built-in amplifier.
Caution: When the “built-
in amplifier” is set to “Off”, the system will not output any
sound.
3
Steering wheel
controller learning
Wire the steering wheel controller depending on the actual vehicle model. After
connecting the host machine, allow the device to learn the steering wheel through the
controller. Short press “Play/Pause”, “Previous”, “Next”, “Volume +”, “Volume -
“Mute” and "Audio source" and wa
it for the buttons on the steering wheel to be pressed
down to finish the learning and achieve control of the steering wheel with the controller.
4
It can be connected to Alpine on-vehicle DSP and only supports products with matching
controller interfaces. For details, please contact your Alpine dealer.
5 Dimmer control
Dimmer control: when dimmer control is set to “Manual”, the light level can be adjusted;
when dimmer control is set to “Auto”, the illuminating brightness of the
will be reduced when the headlights of the vehicle are ON.
Black screen setting: the screen will turn off after 30 seconds of no operation. Press any
button and the screen will turn on.
6 Language setting
You can choose the interface display in Chinese or English based on your personal
preference.
7
After restoring factory settings, except for the tuned “Dealer Settings”, all setting items
will be restored to the factory default value.
8 About
Select the About interface and you can check information about the device, such as
Software version/Device version/Device name.
To Next Page
Loading...
