Alstom MiCOM P545 - 1.4 Control and support settings; 1.4.1 System data

Settings P54x/EN ST/La4
MiCOM P543, P544, P545, P546
(ST) 4-67
ST
1.4 Contr ort settin
The control and support settings are part of the ma nu and d to configure the
r nfiguratio s submenu as belo




 tection sett


 et



 settin
1.4.1 S
T
ol and supp gs
in me are use
elays global co n. It include settings w:
Relay function configuration settings
Open/close circuit breaker
CT & VT ratio settings
Reset LEDs
Active pro ing group
Password & language settings
Circuit breaker control & monitoring settings
Communications s tings
Measurement settings
Event & fault record settings
User interface settings
Commissioning gs
ystem data
his me
nu provides information for the device and general status of the relay.
Setting range
Menu text Default setting
Min. Max.
Step size
Language English
The default language
Spanish.
us device. Sele nch, Ger an, ed by the ctable as English, Fre m
Password ****
Device default password.
Sys. Fn. Links 0 1
Setting to allow the fixed trip LED to be function self resetting (set to 1 to extinguish the
LED after a period of healthy restoration of load current).
Description MiCOM P54x
16 character relay desc an be edited. ription. C
Plant Reference MiCOM
Associated plant description and can be edited.
Model Number P54??1???M???0K
Relay model number. This display cannot be altered.
Serial Number 123456J
Relay model number. This display cannot be altered.
Frequency 50 Hz 50 Hz or 60 Hz
Relay set frequency. Settable either 50 or 60 Hz
Comms. Level 2
Displays the conformance of the relay to the Couri evel 2 commer L s.