Alstom MiCOM P545 - 1.8.3.2 Control inputs - user assignable functions; 1.8.3.3 CB control

P54x/EN GS/La4 Getting Started
(GS) 3-12 MiCOM P543, P544, P545 & P546
1.8.3.2 Control inputs - user assignable functions
Use the CT
RL I/P CONFIG column to configure the number of USR ASS shown in the
hotkey menu. To SET/RESET the chosen inputs, use the HOTKEY menu.
For more information refer to the “Control Inputs” section in the Operation chapter
(P54x/EN OP).
1.8.3.3 CB control
The CB co
ntrol functionality varies from one Px40 relay to another. For a detailed
description of the CB control via the hotkey menu refer to the “Circuit breaker control” section
of the Operation chapter (P54x/EN OP).
HOT KEY MENU
EXIT
MiCOM
P54x
HOTKEY
CB CTRL
<USR ASSX
STG GRP>
SETTING GROUP 1
SELECT
<MENU
USR ASS1>
NXT GRP
CONTROL INPUT 1
ON
<STG GRP
USR ASS2>
EXIT
CONTROL INPUT 2
ON
<USR ASS1
USR ASSX>
EXIT
CONTROL INPUT 2
ON
<USR ASS2
MENU>
EXIT
SETTING GROUP 2
SELECT
<MENU
USR ASS1>
NXT GRP
SETTING GROUP 2
SELECTED
<MENU
USR ASS1>
CONTROL INPUT 1
ON
<MENU
USR ASS2>
CONTROL INPUT 1
EXIT
<MENU
USR ASS2>
OFF
Confirmation
screen
displayed for
2 seconds
Confirmation
screen
dispalyed for
2 seconds
(See CB Control in Application Notes)
Default Display
NOTE: <<EXIT>> Key returns
the user to the Hotkey
Menu Screen
P1246ENh
GS
Figure 5 Hotkey menu navigation