Alstom MiCOM P545 - Page 535

Programmable Logic P54x/EN PL/La4
MiCOM P543, P544, P545 & P546 (PL) 7-1
PL
CONTENTS
(PL) 7-
1. PROGRAMMABLE LOGIC 5
1.1 Overview 5
1.2 MiCOM S1 Studio Px40 PSL editor 5
1.3 How to use MiCOM Px40 PSL editor 6
1.4 Warnings 6
1.5 Toolbar and commands 7
1.5.1 Standard tools 7
1.5.2 Alignment tools 7
1.5.3 Drawing tools 7
1.5.4 Nudge tools 7
1.5.5 Rotation tools 7
1.5.6 Structure tools 7
1.5.7 Zoom and pan tools 7
1.5.8 Logic symbols 7
1.6 PSL logic signals properties 9
1.6.1 Link properties 9
1.6.2 Opto signal properties 10
1.6.3 Input signal properties 10
1.6.4 Output signal properties 10
1.6.5 GOOSE input signal properties 10
1.6.6 GOOSE output signal properties 11
1.6.7 Control in signal properties 11
1.6.8 InterMiCOM In commands properties 11
1.6.9 Function key properties 12
1.6.10 Fault recorder trigger properties 12
1.6.11 LED signal properties 12
1.6.12 Contact signal properties 12
1.6.13 LED conditioner properties 13
1.6.14 Contact conditioner properties 13
1.6.15 Timer properties 14
1.6.16 Gate properties 14
1.6.17 SR programmable gate properties 15
1.7 Description of logic nodes 16
1.8 Factory default programmable scheme logic 54
1.9 Logic input mappings 54
1.10 Standard relay output contact mappings 57
1.11 Optional high break relay output contact mappings 60