ALTAI A3-Ei - Preparation for Installation

4
Altai Technologies Ltd. All rights reserved
Altai A3-Ei Dual-band 3x3 802.11ac Wi-Fi Access Point
Installation Guide
2.3. Preparation of A3-Ei Installation
Before installation, please prepare the following tools and accessories:
Tools:
 Drill with M6 drill bit (for wall mount only)
 Screw Driver
 Adjustable Wrench
 Hammer (for wall mount only)
 Wire Stripping Tool and Crimping Tool
 Waterproof Tape and Electrical Tape
Accessories
 Ground Wire
x 1
 Ethernet cable
x 2