ALTAI A3-Ei - Introduction

1
Altai Technologies Ltd. All rights reserved
Altai A3-Ei Dual-band 3x3 802.11ac Wi-Fi Access Point
Installation Guide
1. Introduction
This document is written to provide the necessary information for
installing Altai A3-Ei Dual-band 3x3 802.11ac Wi-Fi Access Point (A3-Ei)
on field location.
This document is applicable for hardware platform with the following
models:
Product name:
A3-Ei Dual-band 3x3 802.11ac Wi-Fi Access Point
Model number:
WA3311NAC-E
It is assumed that site survey has been performed. Appropriate
antenna pole and AP locations have been selected. It is highly
recommended that cable lengths of various cables are confirmed.
Good site installation plan should consist of site map, drawing
illustrating AP and poles locations, antenna bearing/down-tilt, antenna
height, and network topology.
User may refer the following documents during A3-Ei installation and
configuration on necessary.
[1] A3 Series Dual-band 3x3 802.11ac Wi-Fi Access Point
Configuration Guide
[2] A3-Ei Dual-band 3x3 802.11ac Wi-Fi Access Point Data Sheet