ALTAI A3-Ei - Restoring Factory Default Setting

17
Altai Technologies Ltd. All rights reserved
Altai A3-Ei Dual-band 3x3 802.11ac Wi-Fi Access Point
Installation Guide
The secondary IP address shall use IP range from 192.168.99.5 to
192.168.99.254. The rest of IP addresses are reserved. If the last byte of
the MAC address matches the reserved IP addresses, the supported
device shall follow the MAC to IP address mapping shown in Table 4:
Ethernet MAC
address
Reserved Purpose
Replaced MAC
byte
Secondary IP
address
XX:XX:XX:XX:XX:00
Invalid IP
A0
192.168.99.160
XX:XX:XX:XX:XX:01
For gateway
A1
192.168.99.161
XX:XX:XX:XX:XX:02
For operator
computer
A2
192.168.99.162
XX:XX:XX:XX:XX:03
For operator
computer
A3
192.168.99.163
XX:XX:XX:XX:XX:04
For operator
computer
A4
192.168.99.164
XX:XX:XX:XX:XX:FF
Invalid IP
AF
192.168.99.175
Table 4 - A3 Series secondary IP address
Example 2
Device Ethernet MAC address: 00:19:BE:20:03:FF
Secondary IP Address of this device: 192.168.99.175 (FF (HEX)  AF (HEX)
 175 (DEC))
9. Restoring Factory Default Setting
Press and hold the reset button until Power LED blinks twice
consecutively, the device restores the factory default setting.
Caution: Restoring the device to factory default settings removes all
configuration changes that you have made. These include the IP address,
password, access control list, and wireless settings. Returning the
configuration of these features to their factory default settings may result in
network connectivity issues