15
EN
Setting the Alarm
Your Altec Lansing speaker system has two separate alarms.
How to Set Alarm 1
1 Ensure your speaker system is powered on.
Ifthesystemisn’ton,presstheSTANDBYbuttononthespeaker
system or the
button on the wireless remote.
2 Press and hold the ALARM1 button for 3 seconds.
ThisputsyouintheAlarmSetmodeforalarm1.
3 Adjust the hour.
Use the
and buttons on your speaker system or the
and
buttonsonthewirelessremotetoadjustthehoursetting.Be
suretotakenoteoftheAM/PMsettingifyouselected12-HourClock
modewhensettingtheclock.ThenpresstheALARM1buttontosave
thissettingandentertheAlarmMinuteSetmode.
4 Adjust the minute.
Use the
and buttons on your speaker system or the
and
buttonsonthewirelessremotetoadjusttheminutesetting.
ThenpresstheALARM1buttontosavethissettingandenterthe
Alarm Volume mode.
5 Set the alarm volume.
Use the
and buttons on your speaker system or the
and
buttons on the wireless remote to set the alarm volume. Then
presstheALARM1buttontosavethissettingandentertheAlarm
Sourcemode.
6 Set the alarm source.
Use the
and buttons on your speaker system or the
and
buttons on the wireless remote to select the alarm source:
iPod,FMorAUX.ThenpresstheALARM1buttontosavethissetting
andentertheAlarmDailyFrequencymode.
NOTE If you wish to wake up to a specific song on your iPod, dock your
iPod on the speaker system, select the song on your iPod, and then select
“iPod”asyouralarmsource.Ifyouhaveselected“FM”asyouralarm
source, the alarm will play the last radio station selected.
7 Select the alarm daily frequency.
Use the
and buttons on your speaker system or the
and buttons on the wireless remote to select the alarm daily
frequency(F):
•ChooseF1-7tohavethealarmgooffeveryday.
•ChooseF1-5tohavethealarmgooffMondaythroughFriday.
•ChooseF6-7tohavethealarmgooffonSaturdayandSunday.
•ChooseF1tohavethealarmgooffonlyonceatthenextselected
time.