Altec ATP-600 PRO - Loading Media; Placing Media in the Printer

17
+31(0)78 - 615 20 33
info@altec.nl
www.altec.nl
+32(0)2 - 270 34 88
info@altec.
be
www.altec.
be
NL
BE
3.3 Loading media
3.3.1 Placing media in the printer
1. Open the top cover of the printer by pulling the green
levers - located on each side of the printer - and lifting
the top cover to the maximum open angle.
2. Make sure the (square) lock of the label holders is set
to open.
3. Separate and hold the media holders open.