Altec ATP-600 PRO - 2 Product overview; 2.1 Unpacking the printer

7
+31(0)78 - 615 20 33
info@altec.nl
www.altec.nl
+32(0)2 - 270 34 88
info@altec.
be
www.altec.
be
NL
BE
1.3 Print specifications
Print head resolution
(dots per inch/mm)
ATP-300 Pro 300 dots/inch (12 dots/mm)
ATP-600 Pro 600 dots/inch (24 dots/mm)
Printing method
Thermal transfer / Direct thermal
Dot size
ATP-300 Pro 0,084 x 0,084 mm (1 mm = 12 dots)
ATP-600 Pro 0,042 x 0,042 mm (1 mm = 24 dots)
Print speed
Up to 6 inch/s (152 mm/s)
Max. print width
105,6 mm (4,15”)
Max. print length
2.540 mm (100”)
1.4 Ribbon specifications
Ribbon outside diameter
Max. 67 mm OD
Ribbon length
300 meter
Ribbon core inside diameter
25,4 mm (1”) ID core
Ribbon width
40 mm ~ 110 mm
Wind direction
Coated Side Out (CSO)
1.5 Media specifications
Media roll capacity
Max. 125 mm (5”) OD
Media core diameter
40 mm (1,5”) ID core
Media type
Continuous, die-cut, black mark, external fan-fold, notch
Wind direction
Coated Side Out (CSO) / Coated Side In (CSI)
Media width
19 mm ~ 112 mm
Media thickness
0,055 mm ~ 0,254 mm
Black mark
Min. 8 mm (W) x 2 mm (H)
Gap height
Min. 2 mm