Altec ATP-600 PRO - 1.2 General specifications

5
+31(0)78 - 615 20 33
info@altec.nl
www.altec.nl
+32(0)2 - 270 34 88
info@altec.
be
www.altec.
be
NL
BE
1.1 Product features
1.1.1 Standard features
The printer offers the following standard features:
Thermal transfer printing / Direct thermal printing
3,5” TFT LCD with 6 buttons
32-bit RISC CPU
Gap transmissive sensor (position adjustable)
Black mark reflective sensor (position adjustable)
See-through ribbon end sensor
Head open sensor
128MB Flash memory
Micro SD card reader for memory expansion, up to SDHC 32GB
RS-232 interface (Max. 115,200 bps)
USB 2.0 interface (Hi-speed mode)
Internal Ethernet print server (10/100 Mbps) interface
USB host
Real time clock & Buzzer
Standard industry emulations right out of the box including Eltron
®
and Zebra
®
language support
Internal 8 alpha-numeric bitmap fonts
Fonts and barcodes can be printed in any one of the four directions (0, 90,180, 270 degree)
Internal Monotype Imaging® true type font engine with one CG Triumvirate Bold Condensed scalable font
Downloadable fonts from PC to printer memory
Clean print head warning
Barcodes, graphics and image printing