To Next PageTo Next PageWhat does E-10 error code mean on Alto-Shaam Ranges?
If your Alto-Shaam Ranges displays error code E-10, it indicates that the cavity air sensor reading is less than 5°F (-15°C). To fix this, verify the sensor integrity.
What does E-11 error mean on Alto-Shaam Ranges?
If your Alto-Shaam Ranges displays error code E-11, it means the cavity air sensor is reading above 517°F (269°C). Verify the sensor integrity to fix this.
What does error E-20 on Alto-Shaam Ranges indicate?
If you are seeing E-20 on your Alto-Shaam Ranges, it means the product probe reading is less than 5°F (-15°C). Verify the sensor integrity.
What does E-21 error code mean on Alto-Shaam Ranges?
If your Alto-Shaam Ranges unit is showing error code E-21, this indicates that the product probe reading is greater than 517°F (269°C). Verify the sensor integrity.
How do I clear E-dU error on Alto-Shaam Ranges?
To clear the E-dU error on your Alto-Shaam Ranges, install the Datakey and cycle the power to control.
How to fix E-80 error on Alto-Shaam Ranges?
To resolve the E-80 error on your Alto-Shaam Ranges, ensure that all temperatures and times are properly set.
General| Model | CC-48 |
|---|---|
| Brand | Alto-Shaam |
| Category | Oven |
| Type | Cook & Hold Oven |
| Power Source | Electric |
| Construction | Stainless Steel |
| Interior Material | Stainless Steel |
| Exterior Material | Stainless Steel |
| Control Type | Digital |
| Humidity Control | Yes |
| Cook & Hold | Yes |
| Halo Heat Technology | Yes |
| Power Supply | 208/240V |
| Width | 48" (1219mm) |
| Warranty | 1 Year |
