INSTALLATION
Converge® ▪ Operator’s Manual ▪ MN-47239 ▪ Rev 3 ▪ 5/23
48
How to Set up an Ethernet Connection
Before you begin ▪ The facility must have an Ethernet port.
▪ You will need an Ethernet cable.
Procedure To set up an Ethernet connection, do the following.
1. Plug the Ethernet cord into the Ethernet port on the oven and the wall outlet.
2. Touch the menu icon /. The menu screen displays.
3. Touch the “Network” icon 0. The “Network Status” screen displays.
Continued on next page
To Next Page
Loading...
