Alto-Shaam Converge CMC-H2H

OPERATION
Converge® ▪ Operator’s Manual ▪ MN-47239 ▪ Rev 3 ▪ 5/23
83
How to Enable/Disable the Handle Light
Procedure To enable the handle light, do the following.
Step Action
1. Touch the menu icon /. The menu screen displays.
2. Touch the “Settings” icon 0. The “General Settings” screen displays.
3. Scroll to the “Handle Light” setting.
Touch the Handle Light button 1. Touch the check mark 2. The handle
light is now enabled.
Repeat the procedure to disable the handle light.
Result The handle light is now enabled/disabled.
CT-TS-013849
a
CT-TS-013852
b
CT-TS-013891
c
d