OPERATION
Converge® ▪ Operator’s Manual ▪ MN-47239 ▪ Rev 3 ▪ 5/23
77
How to Update Software with a USB Drive
Before you begin Make sure:
▪ The oven is on, but not in a cooking mode.
▪ You will need a USB drive with the updated software. To download the most up to
date oven software and register for email notifications when new software
versions are released, please visit https://www.alto-shaam.com/en/customer-
support/software-downloads.
▪ Do not remove the USB drive during the update process.
Procedure To update the software, do the following.
1. Touch the menu icon /. The menu screen displays.
2. Touch the “Settings” icon 0. The “General Settings” screen displays.
3. Plug the USB drive 1 into the port.
Continued on next page
To Next Page
Loading...
