EasyManua.ls Logo

Alto-Shaam Converge CMC-H2H

Alto-Shaam Converge CMC-H2H
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
Converge® Operator’s Manual MN-47239 Rev 3 5/23
100
How to Clean the Oven with the
Catalyst Wash
Precautions
Background
The catalyst wash cycle is identified with a green icon and requires
catalyst wash descaler CE-47859.
The catalyst wash requires three catalyst wash descaler tablets.
A catalyst wash reminder screen displays after 18 hours of
cumulative cleaning (example: after five heavy cleaning cycles.
Cleaning the oven To clean the oven with the catalyst wash, do the following.
Step Action
1. Touch the menu icon /. The menu screen displays.
Continued on next page
WARNING: Burn hazard.
Wear protective gloves, protective clothing, eye protection, and
face protection when handling oven cleaner. Do not open the
oven door during the cleaning cycle.
NOTICE
Using improper cleaning procedures will damage the catalyst
and void the warranty.
Use only Alto-Shaam cleaner CE-47853 when running a
cleaning cycle. For a catalyst cleaning cycle, use only catalyst
wash descaler CE-47859. The use of any other cleaning
chemical may damage the catalyst and void the warranty.
Do not use steel pads, wire brushes, or scrapers when
cleaning.
CT-TS-015585
CT-TS-013849
a

Table of Contents

Other manuals for Alto-Shaam Converge CMC-H2H

Related product manuals