MAINTENANCE
Converge® ▪ Operator’s Manual ▪ MN-47239 ▪ Rev 3 ▪ 5/23
101
Continued from previous page
2. Touch the “Cleaning” icon 0. The “Cleaning” screen displays.
3. Touch “Catalyst Wash” 1.
Distribute the catalyst wash descaler tablets equally between the
chambers. Place tablets on the jet plates.
Touch “Ok” 2 to start the catalyst wash cycle.
4. The oven heats to the required temperature for the catalyst wash cycle, then
the wash cycle starts.
Continued on next page
NOTE: Touching the cancel icon “X” cancels the catalyst
wash cycle. The oven will start a forced rinse. The forced
rinse must complete before operating the oven.
Catalyst Wash requires 3 tablets.
CT-TS-015575
c
d
To Next Page
Loading...
