Alto-Shaam Converge CMC-H2H

OPERATION
Converge® ▪ Operator’s Manual ▪ MN-47239 ▪ Rev 3 ▪ 5/23
85
How to Enable and Use the Replay Function
Background When a cooking process is complete, the replay function repeats the same
cooking process when you touch the replay icon. The replay function can be used
for a programmed recipe or manual cook.
Procedure
To enable the replay function, do the following.
Step Action
1. Touch the menu icon /. The menu screen displays.
2. Touch the “Settings” icon 0. The “General Settings” screen displays.
3. Scroll to the “Temperature Settings.”
Touch the Replay button 1. Touch the check mark 2. The replay function
is now enabled.
Repeat the process to disable the replay function.
Continued on next page
CT-TS-013849
a
CT-TS-013852
b
CT-TS-013936
c
d