TROUBLESHOOTING
Prodigi™ ▪ Operator’s Manual ▪ MN-47965 ▪ Rev 1 ▪ 5/23
120
E-105 6 - Chamber Low water pressure 1. Water supply not connected.
2. Water supply is shut off.
3) Water supply to unit blocked or obstructed
(check filter).
E-109 6 - Chamber Chamber high limit 1. If the oven has experienced an over
temperature condition, allow the oven to cool
down for a minimum of 30 minutes.
2. Press the high limit reset button.
3. Resume cooking operation. If error
reappears contact service provider.
E-606 6 - Chamber Error during cleaning cycle 1. Manually Clean Oven.
2. Manually Rinse Oven.
3. Ensure chemicals removed before use.
4. Resume use of oven. If error repeats
contact service provider.
E-999 48 - Personality
handler
IB and CB dip switch settings not set
correctly
1. Power down control using on/off icon.
2. Cycle power to the oven either by
unplugging the unit or by turning the main
power switch off and then back on.
3. Resume use of oven. If error reappears
contact a service provider.
Code Component Description Troubleshooting steps
To Next Page
Loading...
