OPERATION
Prodigi™ ▪ Operator’s Manual ▪ MN-47965 ▪ Rev 1 ▪ 5/23
73
Continued from previous page
3. Plug the USB drive 1 into the port.
4. Scroll to “System Backup & Update.”
Touch “Backup settings to USB” or “Restore settings from USB” 2.
Loading the recipes The oven downloads or restores the settings. When the process is complete,
touch the check mark to return to the general settings screen. Remove the USB
drive.
Result The settings have now been saved to the USB drive or restored from the USB
drive.
To Next Page
Loading...
