Amana SRD25S3 User Manual

RS1300003 Rev. 0 24 December 1997
Max Cool Pad
Activates Maximum refrigerator mode setting
refrigerator to coldest setting for 24 hours or until
Max Cool pad is pressed again.
1. Refrigerator indicator light will glow.
2. To adjust maximum refrigerator time refer to Mode
B functions.
Alarm Off Pad
Turns off alarm signals. See Alarms section to
interpret alarm signals.
1. Press and hold Alarm Off pad for 3 seconds to
deactivate Door Open alarm. To reactivate Door
Open alarm, press and hold Alarm Off pad for 3
seconds.
2. If Alarm Off pad is pressed and condition causing
alarm is not corrected, alarm will reset.
Display Off Pad
1. Deactivates control panel.
2. Deactivates temperature indication area of control.
panel.
Program Mode
*
activates Program Mode . See Program Mode
section for description of functions available.
1. Open refrigerator door.
2. Press
*
pad.
3. Within 6 seconds press the following pads in this
sequence: Max Cool, Fast Freeze, Max Cool, Fast
Freeze.
4. Tone will sound 3 times and control will be in
Program Mode A.
Vacation
Defrost unit less often during extended periods of non-
use. To begin Vacation Mode
1. Press
*
pad.
2. Press Vacation pad.
To deactivate Vacation Mode, open either refrigerator
or freezer door or press
*
and Vacation pad.
NOTE: See Adaptive Defrost section for more
information on Vacation Mode.
Display Panel Operation
Keyboard Pad Functions
Entry Tone
Indicates a pad was pressed, command read and
accepted. Turn off entry tone by pressing and holding
*
pad for 3 to 5 seconds.
Command Accepted Tone
Three short tones indicate command accepted.
*
1. Activates control panel. Control panel remains
active at least 10 minutes.
2. Turns off Power Up Alarm (flashing lights) after
power is first plugged in or after power outage.
Note: All pads, except Alarm Off , are inactive until
*
is
pressed.
Freezer Temp Pad
Activates freezer temperature setting mode.
1. Freezer indicator light will glow. Freezer
temperature setting will be displayed. Factory
setting is 5 .
2. Change freezer temperature setting by pressing
Warmer or Colder pad.
Ref Temp Pad
Activates refrigerator temperature setting mode.
1. Refrigerator indicator light will glow. Refrigerator
temperature setting will be displayed. Factory
setting is 5 .
2. Change refrigerator temperature setting by
pressing Warmer or Colder pad.
Warmer Pad
Raises temperature setting one bar at a time. If entry
tone is on, tone will sound at each bar level until top
level is reached.
1. Turn on temperature setting function of control
panel by pressing Warmer pad.
2. Press and hold Warmer pad to raise temperature
setting at a faster rate.
Colder Pad
Lowers temperature setting one bar at a time. If entry
tone is on, tone will sound at each bar level until
bottom level is reached.
1. Turn on temperature setting function of control
panel by pressing Colder pad.
2. Press and hold Colder pad to lower temperature
setting at a faster rate.
Fast Freeze Pad
Activates Maximum freezer mode setting freezer
temperature to coldest setting for 24 hours or until
Fast Freeze pad is pressed again.
1. Freezer indicator light will glow.
2. To adjust maximum freezer mode time refer to
Program Mode B functions.

Amana SRD25S3 Specifications

General

Brand	Amana
Model	SRD25S3
Category	Refrigerator
Language	English