Amano PIX-21 - Print Settings Configuration; Auto Print Mode Selection; Leading Zero Setting

Page 13
10. Setting the Language
1. When the display flashes
PP66
LAn9
, press the
ENTER button.
2. Press the CHANGE button until the correct language
appears, then press the ENTER button.
3. When the display flashes
PP66
LAn9
, press the CHANGE
button to move to the Print Direction.
Please refer to the Language Table for selections.
11. Setting the Print Direction
1. When the display flashes
PP77
Prdr
, press the ENTER button.
2. Press the CHANGE button until the correct direction
appears, then press the ENTER button.
Right Side Printing = Left Side Printing =
r h 9 L E F
3. When the display flashes
PP77
Prdr
, press the CHANGE
button to move to the Auto Print Setting.
12. Setting the Auto Print
1. When the display flashes
PP88
APr
, press the ENTER button.
2. Press the CHANGE button until the correct printing mode
appears, then press the ENTER button.
on P (Auto Print) allows you to print automatically by activating the paper detect switch.
OFF (Manual Print) allows you to print whenever the PRINT buttons are pushed.
on
P:5
(Precision Print) requires you to activate the paper detect switch while pressing the PRINT
buttons.
3. When the display flashes
PP88
APr
, press the CHANGE
button to move to the Leading Zero Setting.
LL ll
E n 9
PP 66
L A n 9
English = French = Italian = Roman = Common =
LL ll
E n 9
LL 33
F r n
LL 55
l Y
LL 77
r o n
LL 99
C o n
Spanish = German = Portuguese = Japanese =
LL 22
S P n
LL 44
9 E r
LL 66
P 9
LL 88
J P n
PP 66
L A n 9
Language Table
r l 9
__
PP 77
P r d r
PP 77
P r d r
oo nn
P
PP 88
A P r
PP 88
A P r