Construction and function of the basic machine
56
UF02 BAG00225.3 09.22
5 Construction and function of the basic machine
5.1 Function
Through the suction valve chest and the suction filter (2), the spraying
pump (1) draws
spray liquid from the spray liquid tank.
fresh water via the external suction port (3).
flushing water from the flushing water tank.
Thus, the drawn liquid is conveyed to
the part-width section valves (5) via the pressure filter (4). The
part-width section valves take over the distribution to the spray
lines.
Alternatively:
through the pressure filter (4) to the single nozzle control (10).
to the injector (6) and the induction bowl (7).
To prepare the spray liquid, pour the required quantity of agent
into the induction bowl and draw into the spray liquid tank.
directly in the spray liquid tank.
to the internal (8) or external cleaning switch tap (9).
The agitator ensures homogeneous spray liquid in the spray liquid
tank.
Single nozzle control
Part-width section control
To Next Page