Construction and function of the basic machine
74
UF02 BAG00225.3 09.22
Check the compatibility of the hydraulic fluids before connecting
the machine to the tractor hydraulic system.
Do not mix any mineral oils with biological oils.
Observe the maximum permissible hydraulic fluid pressure of
210 bars.
Only couple clean hydraulic connectors.
Slide the hydraulic connector(s) into the hydraulic sockets until
they are heard to engage.
Check the coupling points of the hydraulic hose lines for correct,
tight seating.
1. Swivel the actuation lever on the control valve on the tractor to
float position (neutral position).
2. Clean the hydraulic plug for the hydraulic hose lines before con-
necting them to the tractor.
3. Connect the hydraulic hose line(s) to the tractor control unit(s).
5.7.2 Uncoupling the hydraulic hose lines
1. Swivel the actuation lever on the control unit on the tractor to
float position (neutral position).
2. Unlock the hydraulic connectors from the hydraulic sockets.
3. Protect the hydraulic plug and hydraulic socket against soiling
using the dust protection caps.
4. Place the hydraulic hose lines in the hose cabinet.
To Next Page