Construction and function of the basic machine
UF02 BAG00225.3 09.22
75
5.8 Control terminal / control computer
UF field sprayers with ISOBUS or AMASPRAY
+
control terminal are
equipped with a flow meter.
The application rate is set on the control terminal.
The control terminal controls a job computer. Here, the job computer
receives all necessary information and manages the area-based reg-
ulation of the application rate [l/ha] depending on the quantity (target
quantity) entered and the current operational speed [km/h].
5.8.1 Control terminal
The Control terminal can be used to:
enter machine-specific data.
enter job-related data.
cause the field sprayer to change the spray rate used in spray-
ing operation.
operate all functions on the sprayer boom (Profi-folding only).
operate special functions.
monitor the field sprayer during spraying operation.
Once a job has been started, the Control terminal stores the data ac-
quired.
See operating manual for software ISOBUS.
AmaTron 4 AmaPad 2
To Next Page