Construction and function of the basic machine
64
UF02 BAG00225.3 09.22
5.3 Parking supports
The implement is equipped with 2 telescopic parking supports.
The implement may only be parked in parking position on the two ex-
tended parking supports.
The parking support is moved into parking position or transport posi-
tion by manually pulling on the rod.
Parking supports in parking position
Hook the pulling rod on the lug (1) and pull to move the parking sup-
port into transport position.
Parking supports in transport position
Hook the pulling rod on the lug (2) and pull to move the parking sup-
port into parking position.
The parking position of the pulling rod is on the right of the con-
trol panel.
To Next Page