Construction and function of the sprayer boom
UF02 BAG00225.3 09.22
95
6.1.2 Super-S boom, folding via the tractor control unit
For information on Profi-folding, See operating manual for software
ISOBUS.
To fold out the sprayer boom, depending on the version, the preselec-
tion button "Fold sprayer boom" must be pressed on the operating ter-
minal before tractor control unit green is actuated.
See operating manual for software ISOBUS.
Folding out the sprayer boom
1. Actuate tractor control unit yellow .
Raise the boom to unlock it from its transport position.
2. Actuate tractor control unit green until
both boom packages are folded out
the individual segments of the two booms are fully folded out and
the swing compensation is unlocked.
The appropriate hydraulic cylinders lock the boom in its working
position.
Folding out does not always happen symmetrically.
3. Actuate tractor control unit
yellow
Set the spraying height for the sprayer boom.
Folding in the sprayer boom
1. Actuate tractor control unit yellow
Raise the sprayer boom to a medium height.
2. Set tilt adjustment to "0" (if present).
3. Actuate tractor control unit green until
the individual segments of the two booms are fully folded in.
the two boom packages are folded in.
4. Actuate tractor control unit
yellow.
Lower the boom, locking it in the transport position.
The swing compensation locks automatically before the boom folds in.
To Next Page