Construction and function of the basic machine
76
UF02 BAG00225.3 09.22
5.8.2 AMASPRAY
+
The AMASPRAY
+
can be used to:
enter machine-specific data.
cause the field sprayer to change the spray
rate used in spraying operation.
preselect hydraulic functions which are op-
erated using the tractor control unit.
operate special functions.
monitor the field sprayer during spraying
operation.
switch part width sections on and off
Current spread rate, speed, worked area, total
area, quantity applied and overall spread rate,
working time and distance travelled are continu-
ously detected.
See also the AMASPRAY
+
operating
manual.
5.9 AmaPilot+ multi-function stick
The implement functions can be executed using
the AmaPilot+.
AmaPilot+ is an AUX-N control element with
freely selectable button assignment.
A default button assignment is pre-configured for
every Amazone ISOBUS implement.
The functions are spread over 3 levels and can
be selected by pressing with your thumb.
In addition to the standard level, two other con-
trol levels can be switched.
To Next Page