Construction and function of the basic machine
UF02 BAG00225.3 09.22
73
Oil volume flow
Depending on the implement equipment (equipment a, b, c), the im-
plement requires a specific oil volume flow that must be provided by
the tractor.
Select the tractor such that it provides the required oil volume flow at
operating point X on the field and also on the headlands with a mod-
erate engine speed. You must also consider the tractor's own require-
ments.
n oil shortage impairs the functioning of the implement and can
cause damage to the implement.
Load sensing operation
For load sensing operation, move the switch tap on the hydraulic
block to the corresponding position.
5.7.1 Coupling the hydraulic hose lines
WARNING
Risk of crushing, cutting, catching, drawing in and impact from
faulty hydraulic functions when the hydraulic hose lines are in-
correctly connected.
When coupling the hydraulic hose lines, observe the coloured mark-
ings on the hydraulic plugs.
To Next Page