AMD MB500 - JP7: Case Open Setting; JP8: Compactflash Master;Slave Selection; JP9: ATX;AT Mode Select

INSTALLATIONS
JP7: Case Open Setting
Jumper Setting Function
Short/Closed Case open
Open Case closed
JP8: CompactFlash Master/Slave Selection
Jumper Setting Function
Short/Closed Slave
Open Master
JP9: ATX/AT Mode Select
Remarks: This jumper is supported only on board version 1.1 and
above.
Jumper Setting Function
Pin 1-2
Short/Closed
ATX Mode (default)
Pin 2-3
Short/Closed
AT Mode
10 MB500 User’s Manual