Ametek 3050-AM - Installation and Start-Up; Analyzer Requirements; Installation Connections

Installation & Start-Up | 3-1
INSTALLATION AND STARTUP
Read this entire chapter before installing the 3050 AM analyzer.
Failure to do so may impair protection against fire, electric shock and
injury originally provided by this equipment. Do not use this ana-
lyzer in a manner not specified in this manual.
“This equipment is suitable for use in Class I Division 2, Groups A
thru D or Non-hazardous locations only.”
This chapter contains information on the installation and setup of the
3050 AM Moisture Analyzer including:
• Analyzer Requirements:
- Space Requirements
- Utility Requirements
- Electrical Requirements
- Sample Temperature and Pressure Requirements
• Installation Connections:
- User-Supplied Items
- Rear Panel Connections
- Dryer Installation
- Gas Connections
- Electrical Connections
- Communication Connections
- Signal Connections
- Analyzer Setup
- Initial Startup
- Initial Zero
!
WARNING
!
WARNING