4-6 | 3050 AM Moisture Analyzer
Con g Key
The Config key is used to define device and communication settings.
Display
Select the format for the display you want to use.
Contrast
Enter a value from 1 to 9. The default is 5.
Back Light
Select On or Off. The default is ON.
Font
This is a factory-set parameter that identifies
the type used for the display on the ana-
lyzer.
Config
Display
Contrast
Back Light
Font
Enter Value
1 to 9
On
Off
Enter Value
0 or 1
Figure 4-6.
Main menu for the Con g
key.
CONFIG
Display
Communication
Sample Gas
Clock
Zero Schedule
Production
Codes
Moisture Unit
System Test
To Next Page
Loading...
