vi | 3050 AM Moisture Analyzer
Safety Notes
WARNINGS, CAUTIONS, and NOTES contained in this manual emphasize critical instructions as
follows:
An operating procedure which, if not strictly observed, may result in personal injury or envi-
ronmental contamination.
An operating procedure which, if not strictly observed, may result in damage to the equipment.
Important information that should not be overlooked.
Electrical Safety
Hazardous voltages are present in the analyzer housings when power is applied to the system.
Always shut down power source(s) before performing maintenance or troubleshooting. Only a
qualified electrician should make electrical connections and ground checks.
Any use of the equipment in a manner not specified by the manufacturer may impair the safety
protection originally provided by the equipment.
Grounding
Instrument grounding is mandatory. Performance specifications and safety protection are void
if instrument is operated from an improperly grounded power source.
Verify ground continuity of all equipment before applying power.
!
CAUTION
NOTE
Sample Gas
Potential hazards of the sample gas should be taken into consideration before connecting the
sample to the analyzer. Personal protective equipment and proper ventilation should be used if
sample gas is toxic, flammable, or corrosive. Check the sample line and all connections for leaks
before powering up. Consult plant safety personnel for appropriate exhaust venting guidelines
for specific sample gas type.
NOTE
!
WARNING
!
WARNING
To Next Page
Loading...
