User Interface | 4-11
Figure 4-8.
Dryer and Moisture Generator
code entry screens.
Weekly Select the day of the week from the drop-down list under Day
of the week at the bottom of the box. You must also enter a
time of day (1 through 24) in the Hour slot to begin the zero
cycle.
Monthly Enter the numeric (1 through 28) day of the month in the
Day slot, and the time (1 through 24) in the Hour slot to
begin zero cycle.
Scheduled Zero
Schedule routine Zeros by clicking the Daily, Weekly, or Monthly button
Never No zero cycle will be done. Scheduling slots at the bottom of
the box are not available.
Daily Select the time of day by entering a number in the Hour slot
at the bottom of the box.
The analyzer uses a 24-hour clock. Example: 1:00 PM = 13 hours.
Weekly Select the day of the week from the drop-down list under Day
of the week at the bottom of the box. You must also enter a
time of day (1 through 24) in the Hour slot to begin the zero
cycle.
Monthly Enter the numeric (1 through 28) day of the month in the
Day slot, and the time (1 through 24) in the Hour slot to
begin zero cycle.
Saving Your Settings
To save settings on the Schedule tab, click Apply.
To abort changes you have made, click Cancel. This will close the Conigurator software
program.
NOTE
To Next Page
Loading...
Need help?
General
