Ametek 900

Service and Parts | 6-5
Optical Bench Spare Parts, 120 VAC/240 VAC Analyzer
Part No. Description
QTY
(1 Year)
QTY
(2 Year)
100-0688
300-8844
Magnesium (Mg) Source Lamp
(Lamp 1, Optical Bench)
(Standard Software)
OR
Manganese (Mn)/Nickel (Ni) Source Lamp
(Lamp 1, Optical Bench)
(COS/CS2 Software)
1
1
2
2
300-2070 Cadmium (Cd) Source Lamp
(Lamp 2, Optical Bench)
(Standard or COS/CS2 Software)
1 2
300-1528 O-Ring PUR
(Chopper Motor Drive Belt in Optical Bench)
1 2
300-9437 Bearing, Chopper Wheel
(Chopper Assembly in Optical Bench)
0 2
Measuring Cell Spare Parts
Part No. Description
QTY
(1 Year)
QTY
(2 Year)
300-0281 Cell Window, Fused Silica
(Measuring Cell)
4 6
100-1911 O-Ring, Size 125, Baked Teon Coated Aas
(Measuring Cell)
8 16
Expo Technologies MiniPurge
®
System With eTimer
Spare Parts
AMETEK recommends replacing the Battery Pack in the Expo
Technologies MiniPurge
®
System, which provides power to the system’s
electro-pneumatic timer, every three years to ensure the MiniPurge
®
System continues to properly purge the AMETEK analyzer’s electronics
enclosure.
Part No. Description
QTY
(3 Year)
301-4356
Battery Pack, Intrinsically Safe for Expo Technologies MiniPurge
®
System
with eTimer
1