Ametek BARBEN ANALYTICAL OXY visor

11
IOM (Safety) - Installation, Operation and Maintenance
Optical Oxygen Analyzer
2.9 Declaraon of Conformity - Cercate
Declaration of Conformity
According to EN ISO/IEC 17050-1:2010
Manufacturer Name (Nom du Fabricant): Barben Analytical | AMETEK
Address (Adresse): 5200 Convair Drive
Carson City NV, 89706 USA
Web: https://www.barbenanalytical.com
We hereby declare under our sole responsibility that the following apparatus:
(Nous déclarons par la présente sous notre seule responsabilité que les appareils suivants:)
Product Name (Nom du produit): OXYvisor
Product Description (Description du produit): Process Oxygen Analyzer
Model Number(s) (Numéros de modèle): Series BOA; followed by -AC or -DC; followed by -1, -2 & -3; followed by -S025,
-S050, -S100, -Sxyz, or-SFP; followed by -B, -L or -R; followed by -SI or -AM
Product Category (Catégorie de produit): Electrical equipment for meaurement , control and laboratory use.
Complies with the essential requirements of the following applicable European Directives:
(Conforme aux exigences essentielles des directives européennes applicables suivantes):
Electromagnetic Compatibility (EMC) Directive 2014/30/EU
Low-voltage (Safety) Directive 2014/25/EU
Potentially Explosive Atmospheres (ATEX) Directive 2014/34/EU
RoHS Directive 2011/65/EU
EMC: Emissions (Les émissions)
EN 61326-1:2013 (IEC 61326-1:2012) Group 1 Class A
EN 61000-3-2:2014 (IEC 61000-3-2:2014)
EN 61000-3-3:2013 (IEC 61000-3-3:2013)
Immunity (Immunité)
EN 61326-1:2013 (IEC 61326-1:2012) Group 1, Class A
EN 61000-4-2:2009 (IEC 61000-4-2:2009)
EN 61000-4-3:2006/A1:2008/A2:2010 (IEC 61000-4-3:2006+A1+A2)
EN 61000-4-4:2004/A1:2010 (IEC 61000-4-4:2004+A1)
EN 61000-4-5:2006 (IEC 61000-4-5:2006)
EN 61000-4-6:2009 (IEC 61000-4-6:2009)
EN 61000-4-8:2010 (IEC 61000-4-8:2010)
EN 61000-4-11:2004 (IEC 61000-4-11:2004)
Safety (Sécurité): EN 61010-1 (IEC 61010-1)
July 31’st, 2019 || Carson City NV USA
Date and Place of Issue Melvin W.  weatt Jr. || Product Line Manager
1906 AME BA OV DoC EU R1
Potentially Explosive:
(Potentiellement Explosif):
Zone 2 (Model Selection):
Zone 2 (Model Selection):
II 2 G Ex db op is IIC T4 Gb
0539
Ex db op is IIC T4 Gb
Environmental Affairs (Affaires environnementales): EN 50581:2012
Articles manufactured on or after the Date of Issue of this Declaration of Conformity do not contain
any of the restricted substances in concentrations/applications not permitted by the RoHS Directive.
Supplementary Information (Information supplémentaire):
1. This product meets the Safety requirements of the United States (UL 61010-1) and Canada (CAN/CSA-C22.2 No. 61010-1)
2. This product meets the HazLoc Zone 1 requirements in the United States (UL 60079-0 6
th
Ed, UL 60079-1 7
th
Ed and 60079-28 2
nd
Ed)
and Canada (CAN/CSA C22.2 No. 60079-0 3
rd
Ed, CSA C22.2 No. 60079-1 3
rd
Ed, CSA C22.2 No. 60079-28 1
st
Ed)
3. This product meets the HazLoc Zone 2 requirements in the United States (UL 60079-0 6
th
Ed, UL 60079-7 Ed 5.1, UL 60079-11 6
th
Ed and UL
60079-28 2
nd
Ed) and Canada (CAN/CSA C22.2 No. 60079-0 3
rd
Ed, CSA C22.2 No. 60079-7 5
th
Ed, CSA C22.2 No. 60079-11 2
nd
Ed and CSA
C22.2 No. 60079-28 1
st
Ed)
EN 60079-0:2013/A11:2013 (IEC 60079-0 6
th
Ed)
EN 60079-7:2015/A1:2018 (IEC 60079-7 Ed 5.1)
EN 60079-11:2012 (IEC 60079-11 6
th
Ed)
EN 60079-28:2015 (IEC 60079-28 2
nd
Ed)
Zone 1 (Model Selection):
Zone 1 (Model Selection):
EN 60079-0:2012/A11:2013 (IEC 60079-0 6
th
Ed)
EN 60079-1:2014 (IEC 60079-1 7
th
Ed)
EN 60079-28:2015 (IEC 60079-28 2
nd
Ed)
Atmospheres:
(Atmosphères):
Demko 19 ATEX 2031,
issued by UL DEMKO International A/S
IECEx UL 19.0040,
issued by UL LLC
Demko 19 ATEX 2036,
issued by UL DEMKO International A/S
IECEx UL 19.0072,
issued by UL LLC
Meets the applicable HazLoc requirements as described in Certi cate’s:
Ex ec [ic] op is IIC T4 Gc
II 3 G Ex ec [ic] op is IIC T4 Gc
Figure 4 - OXYvisor Declaration of Conformity
Section 2
Technical Product Specication