193111-095
INTRODUCTION
September 30, 2011 1-1
INTRODUCTION
How To Use This Manual
IMPORTANT: It is especially
important that all charger
internal components be kept
clean and dry, and all
electrical connections
tightened. Replace any
precautionary or instruction
label that cannot be easily
read.
To ensure safe operation, read the entire manual,
including the chapter on safety instructions and
warnings.
Throughout this manual, the words WARNING,
CAUTION, and NOTE may appear. Pay particular
attention to the information provided under these
headings. These special annotations are easily
recognized as follows:
WARNING gives information
regarding possible personal
injury. Warnings will be
enclosed in a box such as this.
CAUTION refers to possible equipment
damage. Cautions will be shown in bold
type.
NOTE offers helpful information concerning
certain operating procedures. Notes will be
shown in italics.
Equipment Identification
The unit's identification number (specification, model,
serial number) usually appears on a nameplate
attached to the front panel.
Receipt Of Equipment
When you receive the equipment, check it against the
invoice to make sure it is complete and inspect the
equipment for possible damage due to shipping. If
there is any damage, notify the carrier immediately to
file a claim. Furnish complete information concerning
damage claims or shipping errors to the company
shown on the cover of this manual. Include all
equipment identification numbers and group part
numbers (if any) as described above along with a full
description of the parts in error.
Move the equipment to the site of installation before
uncrating. Use care to avoid damaging the equipment
when using bars, hammers, etc., to uncrate the unit.
Additional copies of this manual may be purchased by
contacting the company shown on the cover of this
manual. Include the Owner's Manual number and
equipment identification numbers.
To Next Page
Loading...
Need help?
General
