Ametek NetWave 20 User Manual

AMETEK CTS NetWave
M a n u a l
F o r O p e r a t i o n
NetWave
NetWave 3.1, 5, 7, 7.1, 20, 30, 60, 67
NetWave 7.2, 20.1, 30.1, 30.4, 60.1, 67.1
NetWave 7.3, 20.2, 30.2, 60.2, 67.2, 90.2
NetWave 20.3, 30.3, 60.3, 67.3, 90.3, 108.3
NetWave 20.5, 30.5, 67.5, 90.5, 108.5
NetWave 90.3MS
Simulation of the most required power supply
phenomena’s
FW Version >7.00.00
The NetWave is a single and three phase AC power source, specifically
designed to meet the requirements as per IEC/EN 61000-4-8, 13, -14, -17,
-27, -28. It is also serving as a DC power source to cover the requirements
as per IEC/EN 61000-4-29 for voltage dips and interruptions on DC
supplies as well as tests for electrical vehicles.
Its output power with low distortion and high stability, even if supplying
dynamic loads, guarantees full compliant measurements for harmonics
and flicker testing as per IEC/EN 61000-3-2, JIS C 61000-3-2 and IEC/EN
61000-3-3 as well as per IEC/EN 61000-3-11 and IEC/EN 61000-3-12.
Additionally, the NetWave is also well suited for avionics testing as per DO-
160, MIL-STD-704, Airbus ABD0100 and Boeing and testing of electrical
vehicle standards i.e. LV 123 and VW 80300.
• IEC 61000-3-2
• IEC 61000-3-3
• IEC 61000-3-11
• IEC 61000-3-12
• IEC 61000-4-8
• IEC 61000-4-13
• IEC 61000-4-14
• IEC 61000-4-17
• IEC 61000-4-27
• IEC 61000-4-28
• IEC 61000-4-29
• JIS C 61000-3-2
• MIL-STD-704
• RTCA/DO 160
• Airbus
• Boeing
• VW 80300
Version:
1.60/ 14.12.2020
the benchmark for emc
Replaces:
1.59/ 16.11.2020
Filename:
UserManual-Netwave-E-V1.59.docx
Print date:
14.12.20

Ametek NetWave 20 Specifications

General

Brand	Ametek
Model	NetWave 20
Category	Industrial Equipment
Language	English

Summary

Safety

1.1. Safety Aspects and Responsibilities

Crucial safety precautions, operator responsibilities, and general hazards during operation.

1.2. Hazards and Personnel Qualification

Identifies electrical hazards, equipment risks, and qualification requirements for operators.

Model Overview

2.1. Single-Phase Models and Extensions

Details single-phase NetWave models, their specifications, and available extension modules.

2.2. Three-Phase Models

Lists various three-phase NetWave models, their specifications, and series extensions.

Functions

4.1. Front Panel Controller Overview

Describes the NetWave's front panel layout, buttons, indicators, and display.

4.2. Single-Phase Systems

4.3. Three-Phase Systems

Front Panel Operation

5.1. Power On and Menu Navigation

5.3. Warning and Alarm

Describes warning messages and alarm codes, and how to remedy them.

Multi Source Operation

6.1. Opt-3 Multi Source Configuration

Steps and schematics for connecting three NetWaves into a Multi Source system.

6.2. Opt-3 Cascade Source Configuration

Steps and schematics for connecting two NetWaves into a Cascade Source system.

6.3. Changing Master/Slave Operating Modes

Accessories and Options

9.3. Opt-3 MultiSource

Configuration for connecting three NetWaves for enhanced combined AC power.

9.4. Opt-3 CascadeSource

Configuration for connecting two NetWaves for enhanced combined DC power.