AMETEK CTs NetWave
3. Delivery groups and put in service
Identical accessory parts are delivered only once if several devices are ordered. The delivered packing list is in
each case valid for the delivery.
3.1. Basic equipment NetWave 3 / 5 / 7
• Power source NetWave 3 / 5 / 7
• CEE connector 32A (NetWave 7)
• Mono phase connector Type 223 ( NetWave 3 / 5)
• ESA1 EUT Adapter country coded
• 0.5m banana cable for sense ( 2*black, 2* blue, 1* yellow-green )
• Fuse: 1 Set of spare fuses 2* 1 A, 2* 3.15 A, 2* 25 A
• Connectors 1 Set of banana connectors 2* black, 2* blue
• Calibration certificate
• Manual on USB memory stick
• Software with license
3.2. Scope of supply NetWave 7.x
• Power source NetWave 7.1 / 7.2 / 7.3
• Rack complete with wheels and mains power switch
• IT-NetWave built in insulating transformer with filter input (3*208 V or 3*400 V)
• CEE connector 32 A
• ESA1 EUT Adapter country coded
• 0.5 m banana cable for sense ( 2* black, 2* blue, 1* yellow-green )
• Fuse: 1 Set of spare fuses 2* 1 A, 2* 3.15 A, 2* 25 A
• Connectors 1 Set of banana connectors 2* black, 2* blue
• Emergency switch with red button
• Manual on USB memory stick
3.3. Scope of supply NetWave 20.x / 30.x / 60.x / 67.x / 90.x / 108.x
• Power source NetWave
• 3-phase EUT Out connector male 32 A (NetWave 20.x & 30.x only)
• Connector set EUT Out :100 A connectors (Multicontact)
• Emergency switch with red button
• Interlock terminator and interlock connector (only for .5 models)
• Sense cable with MIL connectors male-female
• Fuse NetWave 20.x/30.x: 1 Set of spare fuses 2* 1 A, 2* 2.5 A, 2* 80 A
• Fuse NetWave 60.x: 1 Set of spare fuses 2* (160 A,50 A, 5 A, 4 A, 3.15 A, 205 A,1 A)
• Fuse NetWave 90.x: 1 Set of spare fuses 2* (250 A, 80 A, 6.3 A, 6 A, 2.5 A,1 A)
• Calibration certificate
• Manual on USB memory stick
To Next Page
Loading...
Need help?
General
