AMETEK CTs NetWave
AMETEK CTS GmbH
Sternenhofstrasse 15
4153 Reinach BL1
Switzerland
Phone: +41 61 204 41 11
URL: http://www.emtest.com
Copyright © 2020 AMETEK CTS GmbH All right reserved.
Specifications subject to change
Thank you for purchasing the NetWave generator. This user’s manual lists
precautions that must be taken during use and contains useful information about
the functions and operating procedure of the device. To ensure correct use,
please read this manual thoroughly before starting operation. After reading the
manual, keep it in a convenient location for quick reference whenever a question
arises during operation.
This manual contains a selection of typical system setup with the correct wiring
diagram.
For information about using and handling with the software NetWave Control, see
the manual for this product
The content of this manual is subject to change without prior notice because of
continuing improvements to the instrument’s performance and functions. The
figures given in this manual may differ from those that appear on your display and
screen.
Every effort has been made in the preparation of this manual to ensure the
accuracy of these contents. Should you have any questions or find any errors,
please contact your EM Test representative or send an email to EM Test.
Copying or reproducing all or any part of the contents of this manual without the
permission of EM Test is strictly prohibited.
Microsoft, Windows, Windows 7, Windows 8, Windows 10 are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries.
Other company and product names are trademarks or registered trademarks of
their respective companies
For purpose of this manual, the TM and ® symbols do not accompany their
respective names or registered trademark names.
This manual is written for NetWave Firmware version 7.00.00 and higher
To Next Page
Loading...
Need help?
General
