M O D E L 2 1 7 W D R
O P E R A T O R ’ S M A N U A L
40
6. Wait 10 seconds, flip CB-1 to the ON position, wait for computer to boot up.
7. Once boot up is complete, the MAIN SCREEN will be displayed. On the MAIN SCREEN
touch the SETUP pad.
8. The MAIN SCREEN will prompt you for the PROGRAMMER PASSWORD.
9. ENTER the 5 digit
1-Day Programmer Password.
10. The ALARM SETTINGS will be displayed on SETUP SCREEN.
To Next Page
Loading...
