8. BASIC OPERATIONS
8.1 TURN ON STB
First, open the power switch to turn on the unit.
When the STB is first used, there will play the first channel from
the default Channel List. If the STB is not first used, STB will
play the same channel as last time before turning off.
8.2 POWER
1. Press [Power] Key can enter the Standby state
2. In Standby state, press [Power] Key again can call back the
unit and go on play the previous channel
3. User can also disconnect the device’s main power to end the
Standby state.
8.3 MUTE
1. Press [MUTE] key to mute the sound and the screen will
show up mute OSD.
2. Press [MUTE] key again to restore sound.
8.4 PAUSE
1. In playing mode, press [Pause] key, the picture will be
paused, but the sound of the channel will still continues.
2. Press [Pause] key again, the screen’s picture will skip over to
the current playing picture, and the sound of the channel will
corresponding playing.
8.5 RECALL
Press [RETURN] key will directly switch to the previous channel
that you played before current channel.
8.6 FAVORITE
1. In full screen, press [FAV] key, it will display a window of
”Favorite list” on the left of the screen, which you can watch
like below.
2. In the window of ” Favorite list ”, you can move highlight by
press [Channel Up/Channel Down] key to select favorite
Channels.
3. In the window of ” Favorite list ”, you can press [Left/Right]
key to select favorite groups Pressing [P-/P+] keys can imple-
ment the ”Page up/Page down” function
4. Press [Exit] key to exit the current window.
8.7 AUDIO
1. In full screen, press [AUDIO] key can open the ”Audio” win-
dow on the screen.
2. You can modify the audio track by press [Channel Up /
Channel Down] key and modify the audio mode by press[left/
right] key.
3. Mode: Left/Right/Stereo/Mono
8.8 INFORMATION
In full screen, press [INFO] key (press [INFO] key and [RED]
key) can open information screen, in the window shows the
parameters of current channel.
8.9 EPG
1. The STB has an Electronic Program Guide (EPG) to help you
navigate channels through all the possible viewing options.
The EPG supplies information such as channel listings and
starting and ending times for all available channels. Press
[EPG] key to display EPG screen.
2. Press [Red] key can select the channels by different group,
such as by Favorite/Satellite/Provider/CAS etc.
3. Press [Green] key to select different display mode among
Now EPG, Next EPG, More and Schedule, like the following
picture:
15
USER’S MANUAL
To Next Page
Loading...
