3 Configuration using Sailfish
To configure with Sailfish, reference the Getting Started with Sailfish section.
Settings most commonly configured via Sailfish are detailed below.
3.1 Sampling Mode
Sets the variable that determines when a
sample is taken. Options are time, pressure
increment, sound velocity increment, and
continuous (20Hz) sample rate.
Available when time is selected as the
sample trigger. Options are /second (per
second), /minute (per minute), /hour (per
hour), seconds, minutes and hours.
Available when time is selected as the
sample trigger. Works with Sample Unit
setting to determine sample rate.
AML Oceanographic Ltd. 19 / 43
To Next Page
