AML Oceanographic AML-3 - Log File Format;Monitor Output

5.3 Log File Format/Monitor Output
Command
Description
set scan <parameter>
Add a parameter to be included in the log file
and monitor output.
Optional Parameters:
date
time
bat (Battery)
vbat (Battery Voltage)
ibat (Battery Current)
vext (External Voltage)
iext (External Current)
chargestate (Charger Board Status)
sn (Serial Number)
dep (Calculated Depth)
sal (Calculated Salinity)
den (Calculated Density)
sound (Calculated Sound Velocity)
raw (Raw Values)
Note: Calculated parameters will output
-99.9999 if outside of the valid range of the
calculation formula.
set scan <parameter>
Remove a parameter from being included in
the log file and monitor output.
Optional Parameters:
nodate
notime
nobat (Battery)
novbat (Battery Voltage)
noibat (Battery Current)
novext (External Voltage)
noiext (External Current)
nochargestate (Charger Board Status)
nosn (Serial Number)
nodep (Calculated Depth)
nosal (Calculated Salinity)
noden (Calculated Density)
nosound (Calculated Sound Velocity)
noraw (Raw Values)
set derive <parameter> [y | n]
Enable/disable a parameter to be calculated if
AML Oceanographic Ltd. 27 / 43