SafeWizard Operating Instructions American Security Products Company
Last Revision 10/17/2008 Page 26 of 73 Document 4305199
Chapter 3-1-4
Enable/Disable Users
There may come a time when users temporarily don’t require access to the SafeWizard. In this case, you
have the ability to Enable or Disable a “Subordinate” user
4-3-4.1 Setup Users Menu
Set Up Users
1 Add A New User
2 Modify User Profile
3 Delete A User
4 Enable/Disable User
5 Display User List
6 Print User List
7 Purge All Users
Select number 4, Enable/Disable user.
4-3-4.2 Enable/Disable User Menu
Enable/Disable User
User 01
BOB
Enable (Y/N) Y
BACK-NEXT User
QUIT
Select the user that you would like to enable or disable. Scroll through
the user list by pressing the BACK and NEXT keys on the keypad.
When you get to the desired user press the YES key to enable the
selected user, or NO to disable that user.
**NOTE**
The “Y
” indicates that the user is enabled; it will change to an “N”
when the user is disabled.
Once you have completed this function, the SafeWizard will return to the Setup Users Menu. Pressing the
QUIT key once will take you back to the Main Menu.
To Next Page
Loading...
