SafeWizard Operating Instructions American Security Products Company
Last Revision 10/17/2008 Page 48 of 73 Document 4305199
Chapter 3-4-2-5
Factory Menus-
Locks & Doors-
Setup Deposit Lock
Setup Deposit Lock screen is used to configure the deposit lock feature of the SafeWizard.
3-4-2-5.1 Locks and Doors Menu
1 Set Safe Locks
2 Set Door Sensors
3 Set Entry Doors
4 Set Installed Doors
5 Setup Deposit Lock
QUIT back
Press 5, “Setup Deposit Lock”.
3-4-2-5.2 Locks and Doors Menu
Deposit Lk Enable N
Door Type B/W w/S
Activate Time 03
Open Time 020
Behind Door 00
Pres:0.09 Meas:0.00
Tolerance (in) 0.06
BACK-QUIT # sets pos
Setting up a deposit lock is a great deal like setting up any other
installed door on a SafeWizard. The first field determines whether or
not a sensor will be installed on this door. Activate Time
configures how much time you have to open the door. The
pen
Time is how long the door can be open before an alarm will sound.
The door sensor settings are configured by pressing the “#” key while
the door is closed.
To Next Page
Loading...
