SafeWizard Operating Instructions American Security Products Company
Last Revision 10/17/2008 Page 28 of 73 Document 4305199
Chapter 3-1-6
Print User List
In order to “Print” the user list, you must have a printer plugged in to the parallel port of the SafeWizard
and the printer must be “Online” and ready to print.
3-1-6.1 Setup Users Menu
Set Up Users
1 Add A New User
2 Modify User Profile
3 Delete A User
4 Enable/Disable User
5 Display User List
6 Print User List
7 Purge All Users
Select number 6, for Print User List.
3-1-6.2 Print User List Screen
Is the Printer
Ready?
ENTER When Ready
QUIT To Cancel
Please verify that the printer is plugged in and “Online”.
3-1-6.3 Print User List Status Screen
Is the Printer
Ready?
(Status Meter)
QUIT to Cancel
There should be a “Status Meter” in the lower portion of the screen
that will flash back and forth while the data is being sent to the printer.
3-1-6.4 Print User List Confirmation Screen
User List Sent to
Parallel Printer
ENTER
Next you will see the confirmation screen. Press ENTER to go back
to the Setup Users Menu.
To Next Page
Loading...
